The Starke Arvid Plasterboard lifter is a heavy duty lifter that aids your plasterboard installation. Unfortunately many see installation on high walls and ceilings as a necessary evil. With the emphasis on evil. The fact that lifting plasterboard above shoulder height is ergonomically unsound is obvious to anyone who has tried. However, all this is easy to avoid! Our Board & Material Lift acts as an aid during plasterboard installation so that you do not suffer from musculoskeletal disorders. The Board & Material Lift quite simply holds the boards up for you and you can install them in peace and quiet, effectively and safely. You only need to fasten them to the supporting surface. Naturally, you can also use the lift to provide support at lower levels. Thanks to its ingenious design the lowest level of the board yoke is flush with both the Trestles and Transit Bench. In this way you only need to turnover each board onto the yoke and then raise to the required height.
With one and the same Board & Material Lift you can perform ceiling, sloping ceiling and high wall installation. The horizontal and vertical swivel yoke attachment has a variably adjustable path of 180°, making it easy to choose the right angle of the yoke. The Board & Material Lift features a stable steel tube and sheet-metal design with galvanized sections. Easily dismantled when transporting to take up a minimum of space.
Reduces the load on the body when installing plasterboard above shoulder height
Designed to perfectly interact with the Trestles and Board & Material Lift
Variably adjustable yoke attachment through 180°
Easy to dismantle for transport
Article Number 23000
Max load 100 kg
Width 810 mm
Length 810 mm
Height 2040 mm
Weight 54 kg
Lifting height low position 850-3350 mm
Lifting height high position 1250-3750 mm
Maximum height is 3.75m